Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modeling Torus in Algor

Status
Not open for further replies.
cspkumar

cspkumar

Structural
Joined
Jul 30, 2002
Messages
34
Location
US
I am relatively new to Algor. Can anyone give me tips on how to model a torus using membrane elements in Superdraw? Unfortunately, I do not have access to any other three dimensional drawing software.

Thanks
Kumar
 
Sort by date Sort by votes
If you can, upgrade to V.14 of Algor. It now comes with a scaled down version of Alibre solid modelling software. This will be much easier than trying to do it in Superdraw.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Question Question
FEA Adhesive Modeling
Replies
3
Views
5K
milio000
M
EdwardNigma
  • Locked
  • Question Question
Mastering FEA: How to Get Through Stage 2 (Developing Good Modeling Techniques)?
Replies
7
Views
4K
rb1957
rb1957
oharag11
  • Locked
  • Question Question
Modeling/simulating thermal vias - PCB/Electonic thermal analysis?
Replies
0
Views
722
oharag11
oharag11
vanji1
  • Locked
  • Question Question
If I want to construct myself a geometric stiffness matrix induced by a pre constraint with finite element modeling
Replies
0
Views
1K
vanji1
vanji1
Burner2k
  • Locked
  • Question Question
MSC Nastran - Help in Modeling this Setup
Replies
14
Views
1K
Burner2k
Burner2k

Part and Inventory Search

Sponsor

Back
Top