Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

modeling piles and columns in Plaxis

Status
Not open for further replies.
rozik

rozik

Geotechnical
Joined
Nov 17, 2011
Messages
1
Hi, does anyone know where I can find tips, tutorial, examples how to model piles and columns in Plaxis? In Plaxis manual there is nothing about that.
I need this to my thesis because I am now starting work with Plaxis. Thanks for any help
regards.
 
Status
Not open for further replies.

Similar threads

W
  • Question Question
The minimum number of piles required for static load test
Replies
6
Views
10K
wangqian
W
M
  • Locked
  • Question Question
Driving Piles Through 900mm Rock Revetment
Replies
6
Views
4K
EireChch
EireChch
Sparky4598
  • Locked
  • Question Question
How does torque tell load capacity of helical piles
Replies
3
Views
5K
dik
dik
Rainer_Cambodia
  • Locked
  • Question Question
Longitudinal crack in PHC piles
Replies
2
Views
551
EireChch
EireChch
Useeeer
  • Locked
  • Question Question
Piles on slope ( weathered rock)in marine area
Replies
2
Views
680
Useeeer
Useeeer

Part and Inventory Search

Sponsor

Back
Top