Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modeling of steel-concrete beam-to-column composite joints

Status
Not open for further replies.
AleksaBgd94

AleksaBgd94

Structural
Joined
May 30, 2018
Messages
52
Location
DE
Hi everyone ,

I am very new to Abaqus and I am trying to model a steel-concrete beam-to-column composite joint. Do you have any useful tutorials to recommend? At first, I would like to find out how to model bolts and their connection/interaction with beam,plate and column. Also, I am not sure how to define welding. Is it accurate enough to merge two parts in order to represent welding?

Thanks for your help
 
Status
Not open for further replies.

Similar threads

S
  • Question Question
EQUATIONS TO FIND YOUNGS MODULUS,CONCRETE DAMAGE PLASTICITY PARAMETERS FOR STEEL FIBRE REINFORCED CONCRETE
Replies
4
Views
8K
Shreyas M
S
S
  • Question Question
TO FIND CONCRETE DAMAGE PLASTICITY MATERIAL PROPERTIES FOR STEEL FIBRE REINFORCED CONCRETE BY USING EXPERIMENTAL STRESS STRAIN RESULTS
Replies
0
Views
3K
Shreyas M
S
D
  • Question Question
(ABAQUS) Earlier Failure and Unrealistic Cracking of Reinforced High Strength Concrete Beam Under Bending Simulation
Replies
4
Views
15K
Daniel_LEE
D
R
  • Question Question
Cohesive Zone Modeling of FRP Pull-Out Test in Grooved Concrete – Best Approach for Adhesive Layer in Abaqus?"
Replies
4
Views
4K
FEA way
FEA way
Vishakh_Rajendran
  • Question Question
Convergence of SIF results for a Composite
Replies
5
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran

Part and Inventory Search

Sponsor

Back
Top