alansimpson
Mechanical
I need a model which is a rough likness of a human body to incorporate into an assembly for presentation purposes.
Even a 2D dxf would do.
Even a 2D dxf would do.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
model of human
- Thread starter alansimpson
- Start date
- Status
I have some in UG part file format format. 95% man, sitting, standing, etc.
"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
PatCouture
Mechanical
you may want to try even if it's a solidworks site you can download a lot of stuff in parasolid format. I know that there are some human in there.
Patrick
Patrick
- Status
Similar threads
- Locked
- Question
- Locked
- Question