Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Model conversion between LSDYNA and PAM-Crash in HyperMesh

Status
Not open for further replies.
ming17

ming17

Mechanical
Joined
Nov 29, 2010
Messages
1
Location
US
I need to convert FEA models between LSDYNA and PAM-Crash using HyperMesh. I did a few trials to write a LSDYNA model out as a PAM-Crash input file and then read the input file back into HyperMesh. It complains with errors more or less related to contact definition and ASCII history ouput. Can anyone share some good experience on doing the conversion?

I did a search to find a PAM-Crash manual, but could not find any on internet. Do you know where to find or download the PAM-Crash user manual?

Thanks.

Ming
 
Status
Not open for further replies.

Similar threads

Nir_k
  • Locked
  • Question Question
How to select both the exterior and interior surfaces (All Entities) of an element when creating surfaces in Hypermesh?
Replies
0
Views
2K
Nir_k
Nir_k
Sayed Ghalleby
  • Locked
  • Question Question
Modal analysis and effective mass fraction modification
Replies
1
Views
1K
GregLocock
GregLocock
Beider
  • Locked
  • Question Question
Modeling HDPE with upper and lower yield points and >300% strain - RADIOSS
Replies
1
Views
726
hiper_88
hiper_88
Max121
  • Locked
  • Question Question
"Exporting mesh hypermesh to ansys
Replies
0
Views
723
Max121
Max121
Radius1
  • Locked
  • Question Question
Mouse Wheel Zoom Direction for Hypermesh
Replies
0
Views
569
Radius1
Radius1

Part and Inventory Search

Sponsor

Back
Top