Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Modal analysis and mass input

Status
Not open for further replies.
ECStruct

ECStruct

Structural
Joined
Apr 26, 2002
Messages
17
Location
BR
Hi,

Staad is new to me.
How to do extraction of modal parameters, like frequencies, modal mass and modal participation factors in Staad?
How to input a mass value at a node?

Thanks very much, in advance.
mcerq
 
Status
Not open for further replies.

Similar threads

Joer8ders
  • Locked
  • Question Question
SHAFT Ensoft Program Input Question
Replies
0
Views
874
Joer8ders
Joer8ders
D
  • Locked
  • Question Question
identifying and using AP242 STEP files
Replies
2
Views
3K
dtimberlake
D
NedGan76
  • Locked
  • Question Question
Vector and matrix calculations in Calcpad
Replies
0
Views
2K
NedGan76
NedGan76
RDR89
  • Locked
  • Question Question
DYNA 6.1 Max Frequency Input
Replies
1
Views
391
Strong
Strong
LeRepeteur
  • Locked
  • Question Question
DELMIAWorks VIN Generation and BOM's
Replies
0
Views
731
LeRepeteur
LeRepeteur

Part and Inventory Search

Sponsor

Back
Top