Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

miter joints

Status
Not open for further replies.
dman25

dman25

Materials
Joined
Jun 17, 2008
Messages
5
Location
US
I have been trying to find information on miter joints. CFR 192.233 only allows up to 3 degree miter joints but can't locate any info as to why they are not allowed. Can someone explain why not?
 
Status
Not open for further replies.

Similar threads

W1987
  • Locked
  • Question Question
Question about weld fillet reinforcement in PJP or CJP joints
Replies
2
Views
3K
SJones
SJones
trolex
  • Locked
  • Question Question
Several type of joints using just one WPS
Replies
7
Views
2K
Maria Garcia
Maria Garcia
RInspection
  • Locked
  • Question Question
AWS D1.1 (2010) Prohibited Joints
Replies
3
Views
954
gtaw
gtaw
Salmet
  • Locked
  • Question Question
Radiography of Rectengular Butt joints in over head cranes as per AWS D1.1
Replies
1
Views
148
Mr168
Mr168
Eck75
  • Locked
  • Question Question
Minimum distance between two butt joints plate 2.5" thick for steel st
Replies
1
Views
195
GRoberts
GRoberts

Part and Inventory Search

Sponsor

Back
Top