Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mirroring of 3D PMI in the context of LH / RH parts 1

Status
Not open for further replies.
HarshavardhanGS

HarshavardhanGS

Automotive
Joined
Nov 27, 2019
Messages
1
Location
IN
In the context of applying 3D PMI for LH and RH parts, are there functionalities in CATIA V5 R24 to mirror the 3D PMI similar to mirroring the part geometry?

If not, what are the best practices to be considered to ensure robustness but eliminate / reduce efforts in recreating all the 3D PMI on the mirrored part?
 
Status
Not open for further replies.

Similar threads

A
  • Question Question
Does BOM have links to which drawings are using the parts in it?
Replies
0
Views
6K
aerostudent2618
A
Med Che
  • Question Question
How to get the link of a 2D Component Instance from a Drawing Catalog in CATIA VBA?
Replies
3
Views
5K
Little Cthulhu
Little Cthulhu
C
  • Locked
  • Question Question
Macro to automise the insertion of rivet in a strucuture
Replies
1
Views
1K
LWolf
LWolf
C
  • Locked
  • Question Question
Select and authomise the insertion et assembly of components in a product
Replies
0
Views
624
catialearner
C
CarlosR2022
  • Locked
  • Question Question
3Dx: Relationship between the positions of two physical parts
Replies
1
Views
250
itsmyjob
itsmyjob

Part and Inventory Search

Sponsor

Back
Top