Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Milling and drilling composites

Status
Not open for further replies.
bluecomp

bluecomp

Materials
Joined
Oct 19, 2010
Messages
30
Location
PT
Hi, anyone knows good sites with information or videos on high speed five-axis milling and drilling of composite component and molds.

Thanks
 
Status
Not open for further replies.

Similar threads

kevlar49
  • Locked
  • Question Question
Finding manufacturers of titanium metal matrix composites
Replies
0
Views
341
kevlar49
kevlar49
Eton
  • Locked
  • Question Question
What are the difficulties in machining phenolic resin Aramid Honeycomb (milling)?
Replies
3
Views
570
Eton
Eton
JD_WTG
  • Locked
  • Question Question
GFRP Composite Tear Out and Bearing Strength?
Replies
8
Views
1K
SWComposites
SWComposites
Revngeofrobo
  • Locked
  • Question Question
Balancing Warp and Weft Face
Replies
6
Views
1K
SWComposites
SWComposites
CHagen
  • Locked
  • Question Question
Composites in non-redundant safety critical role
Replies
2
Views
264
Sparweb
Sparweb

Part and Inventory Search

Sponsor

Back
Top