Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Metrology Standard for Threads Formed in Polyglass

Status
Not open for further replies.
Scottsman

Scottsman

Specifier/Regulator
Joined
Jun 1, 2006
Messages
1
Location
US
Is there a reference available that describes the technical aspects of measuring thread form, both on a variable and attribute basis, under the subject line conditions?
 
Status
Not open for further replies.

Similar threads

MechMatengineer
  • Locked
  • Question Question
Quality control for plastic piping
Replies
1
Views
3K
Pud
Pud
Buckshott00
  • Locked
  • Question Question
Process Setting for Improved Over-molding to prevent delamination In Molded Hytrel
Replies
0
Views
960
Buckshott00
Buckshott00
enginesrus
  • Locked
  • Question Question
Adhesive for Polyethylene to Stainless steel
Replies
2
Views
3K
TugboatEng
TugboatEng
99ishvr4
  • Locked
  • Question Question
Improving pipe threads on LDPE injection molded component
Replies
12
Views
1K
Arnaud Divialle
Arnaud Divialle
Thanh_fromVietnam
  • Locked
  • Question Question
Best plastic material/ grade for Plastic Pallet
Replies
2
Views
1K
dgallup
dgallup

Part and Inventory Search

Sponsor

Back
Top