Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Metastability

Status
Not open for further replies.

nbucska

Electrical
Jun 1, 2000
2,191
Metastability is "cured" by a 2-3 stage shift register.

How is the probability affected, if there is a gate or a buffer between two FF=s which has delay and gain ? Formula ?
 
Replies continue below

Recommended for you

1.) The given link contains only excerpts of a lecture.
2.) There is a formula to calculate the probability of metastability but it deals only with FF directly connected.
A delay should increase the probability of M. and a gain should decrease it. But how much???
 
Suggestion: Visit
for essentially delay insensitive bibliography; however, some references are general. They might include both.
Incidentally, the web site in my previous posting gives a hint how to accomplish the delays, namely, over a counter of the clock pulses.
Also, visit
for more info.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor