Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Meshing in CAE 1

Status
Not open for further replies.
altet6

altet6

Mechanical
Joined
Jun 15, 2005
Messages
4
Location
US
Hi guys,

I can't find a way to partition and mesh a 5mm sphere in CAE using hex elements and i don't have any other pre-processor at my disposal...anyone can help?

Thx
 
Sort by date Sort by votes
Should take < 1 minute.

3 orthogonal partitions (XY plane, XZ plane, YZ plane). The sphere will now be eight cells, and all green (structured meshable with all hexes)
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mj345
  • Question Question
Selecting the arcs in ABAQUS/CAE
Replies
2
Views
401
mj345
mj345
A
  • Locked
nanocomposite meshing
Replies
6
Views
2K
Austine316
A
mj345
  • Locked
  • Question Question
Hybrid Meshing in ABAQUS
Replies
1
Views
644
FEA way
FEA way
K
  • Question Question
Trouble Meshing Imported SolidWorks Part in Abaqus – Need Help with Hex or Hex-Dominated Mesh
Replies
2
Views
12K
Simfinite engineering
Simfinite engineering
B
  • Question Question
Adaptive Meshing with Custom Phase‑Field UEL in Abaqus – Feasible or Challenging?
Replies
1
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top