Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

memory pairity error

Status
Not open for further replies.

psozot

Electrical
Apr 15, 2001
45
while surfing on internet suddenly pc comes to halt and shows error as " memory pairity error. system halted". how to rectify it
 
Replies continue below

Recommended for you

yes. i had two nos. 64 mb chips. one become faulty so i replaced it with new one of same capacity. now what to do?
 
First, swap memory locations in the motherboard. Second, replace the new RAM. Third, try and figure out why the RAM went bad in the first place.
 
the problem is still remain same. i replaced two no. memory chips of 64mb with one of 128mb.the only change is in the frequency of occuring. somebody suggested that this is not a hardware issue . instead of when windows processes mixes then this sort of error occurs. and it can be solved by defragmenting hsrd disk. unfortunately this will also not work. now what to do?
 
you must get back to a known good state and start adding components from there!
 
melone: will u plz further explain it?
 
before you started adding memory to your computer, everything was working fine, correct? if so, go back to the last known good configuration and start there. Once you have a stable starting point, then you can start adding components and see what causes the failure.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor