Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Medium-Pressure Cone & Thread...says who?

Status
Not open for further replies.
metootoo

metootoo

Mechanical
Aug 9, 2007
21
Who's standard are these ports made to? I see several manufactures that make MP C&T fittings and valves/manifolds with female C&T ports, but none of them mention the specification reference. Is it an ASTM, SAE, Mil, et.c spec? Is it Autoclave proprietary but now made by any one? I', designing a manifold and need to place on the manufacturing drawing, 1/4" Medium-Pressure Cone & Thread per.....
 
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question
Pressure Differential
Replies
6
Views
3K
vhp 16 TSTC
V
Ahmed Khan
  • Locked
  • Question
Vapor pressure margin for centrifugal pumps mechanical seals
Replies
0
Views
252
Ahmed Khan
Ahmed Khan
cybanical
  • Locked
  • Question
Gearbox pressure buildup and breather calculations
Replies
2
Views
442
Tmoose
Tmoose
Juppehup
  • Locked
  • Question
Stiffness Calculation Model of Thread Connection
Replies
0
Views
315
Juppehup
Juppehup
99ishvr4
  • Locked
  • Question
Help sourcing an internally threaded vulcanized hard fiber seal
Replies
7
Views
308
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top Bottom