Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mechanisms and Robotics

Status
Not open for further replies.
Madhu454

Madhu454

Mechanical
May 13, 2011
129
Hi All,
Could you please suggest any good books on Mechanisms and Robotics to start with. With suitable practical applications
Thanks in advance.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Madhu454,

What is your background? Do you have a degree in mechanical or electrical engineering, or are you a home hobbyist?

--
JHG
 
Upvote 0 Downvote
"Suitable practical applications"? Are you asking us to list applications suitable to robots? How much time do you have...

Dan - Owner
URL]
 
Upvote 0 Downvote
as a general hobbyist, maybe you can start from YouTube.

R.Efendy
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Question
ANSYS - Tube Bending and Measured Ovality
Replies
6
Views
3K
MECHENGTOM
M
I
  • Question
Do engineering drawings imply solid and uniform parts?
2 3
Replies
44
Views
10K
TDWS
T
Henrique Orlandini
  • Question
Interpretation of bolt threaded and unthreaded length for Member Stiffness calculation
Replies
6
Views
2K
Henrique Orlandini
Henrique Orlandini
D
I need a Class 1 division 1 approved cable gland for both USA and Canada. And at the end of the cable there is a Molex connector.
Replies
0
Views
972
denuwan
D
V
  • Question
How to accurately and quickly convert inches to millimeters in technical drawings? 2
2
Replies
23
Views
4K
drawoh
drawoh

Part and Inventory Search

Sponsor

Back
Top Bottom