Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mechanical Property of NACE Material 1

Status
Not open for further replies.
mmbguide

mmbguide

Mechanical
Joined
Apr 8, 2016
Messages
38
Location
DE
hello

The Valve material is WCB>>NACE. By which reference should I compare mechanical property of NACE. Should I compare with WCB as reference or not? Dose NACE material less mechanical property than WCB or it must be the same?

thank you
 
Sort by date Sort by votes
It basically means that WCB shall conform to whatever NACE Standard e.g. MR0175, MR0103 referenced which will meet the metalurgical and manufacturing requirements for sour service specified in the particular standard.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Krausen
  • Locked
  • Question Question
API Valve Trim Type & NACE reqs (Gates, Globes, Checks)
Replies
1
Views
2K
Danlap
Danlap
35jacob35
  • Locked
  • Question Question
Steam Application Valve Stem Material
Replies
1
Views
2K
SPDL310
SPDL310
S
  • Locked
  • Question Question
API 6A standard 10000psi ball valve material selection
Replies
4
Views
2K
Sean_Wei
S
A
  • Question Question
Use of Gate Valve for Throttling
Replies
12
Views
10K
TugboatEng
TugboatEng
trentar
  • Question Question
example of 12516 valve design calculations
Replies
0
Views
8K
trentar
trentar

Part and Inventory Search

Sponsor

Back
Top