Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mechanical & Piping Facility / Plant Deliverables & Review cycles

Status
Not open for further replies.

PipeStretcher

Mechanical
Nov 4, 2020
4
im curious to know what you guys typically deliver to your clients at 30%, 60%, 90% and IFC milestones? PFD's, P&ID's, One line plan, GA or equip location plan, Piping plans and sections, Isometric drawings for installation or fabrication, etc.
 
Replies continue below

Recommended for you

Pretty much all of those at relatively the same stage of completion as % complete. Give or take some. Nobody gives enough time to stagger deliverables one after another. Everything is done in some degree of parallel activity. Although if you are including detail design, add a second phase for all detailed dwgs, pipe plans, elevations, sections, isos and fab dwgs.

Reality used to affect the way we thought. Now we somehow believe that what we think affects reality.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor