Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

measurements made on core plugs.

Status
Not open for further replies.
JohnSayz

JohnSayz

Petroleum
Joined
Feb 2, 2015
Messages
3
Location
NG
hey guys, During core plug measurements to determine permeability and porosity at overburden conditions, certain procedures are run. what are these procedures and their relevance too.
 
Status
Not open for further replies.

Similar threads

meshbah
  • Locked
  • Question Question
Nitrogen Leak Test on a Pipe
Replies
18
Views
4K
pierreick
pierreick
monopoly
  • Locked
  • Question Question
Spiral staircase on storage tank
Replies
9
Views
2K
monopoly
monopoly
ncnpiping
  • Locked
  • Question Question
Thermowell installation orientation on verical pipe as per Aramco Standard
Replies
3
Views
1K
0707
0707
TSsouf
  • Locked
  • Question Question
Level transmitter bridle design issue (connected on the line outlet vessel)
Replies
7
Views
791
pierreick
pierreick
SA07
  • Locked
  • Question Question
Atex markings on site
Replies
0
Views
150
SA07
SA07

Part and Inventory Search

Sponsor

Back
Top