May 16, 2005 #1 labrat1 Mechanical Apr 12, 2005 7 Is there a way to set MDT2005 to use (1st. angle projection) in paper space, layouts?
May 16, 2005 1 #2 steve1 Structural Jul 25, 2001 261 1st angle projection is the ISO standard. This can be set by selecting the AM.Standards tab on the Options dialog box and selecting ISO on the Standard drop down list. Upvote 0 Downvote
1st angle projection is the ISO standard. This can be set by selecting the AM.Standards tab on the Options dialog box and selecting ISO on the Standard drop down list.
