Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Material properties required to run FEA analysis on Laminated veneer lumber (LVL) in ANSYS

Status
Not open for further replies.
Jeevan24

Jeevan24

Materials
Joined
May 28, 2014
Messages
5
Location
US
I am working on project to study FEA vs experimental data correctional. Plotting deflection vs load curve data to understand the trend. I am looking for ASTM standards to calculate Orthotropic Elasticity of Young’s Modulus, Poisson’s Ratio and Shear Modulus as input value in ANSYS. Could you recommend the best wood material modeling? Your help and feedback is greatly appreciated.
Thanks Jeevan
 
Status
Not open for further replies.

Similar threads

G
  • Question Question
FEA Simulation of a Piezoelectric Accelerometer with Frequency Response Analysis
Replies
2
Views
9K
gnana_235
G
Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957
YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
M
  • Question Question
FEA Adhesive Modeling
Replies
3
Views
5K
milio000
M
EdwardNigma
  • Question Question
What boundary condition techniques do you use to keep FEA models realistic?
Replies
9
Views
22K
GregLocock
GregLocock

Part and Inventory Search

Sponsor

Back
Top