Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Material for Moto Guzzi main bearing

Status
Not open for further replies.

Graeme.A

Automotive
Jan 27, 2018
1
How would I find out what material is used for the main bearings (pressed into the carrier) in a Moto Guzzi motorcycle? seen here
The crankshaft is about 6kg and the bearing journals are 54mm and 37mm diameter. The bearing length is 40mm. It is some type of Al alloy that has been manufactured in Italy since 1967.
 
Replies continue below

Recommended for you

Do you have the original, presumably failed, bearing? If so, have XRF (X-ray fluorescence) done on it. If you prepare the sample, sand it with SiC and remove all traces of anything that could have been deposited by the crankshaft, as that will give you a false reading.

Engineering is not the science behind building. It is the science behind not building.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor