coldmountain
Materials
I am looking for info on plastic and composite parts, windon for aircraft (Boeing 747 etc). Can anyone tell me where to find the related info? ( I only need info that are already in public domain) thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
material, design, and spec for aircraft window and interior
- Thread starter coldmountain
- Start date
- Status
You might be interested in Boeing Fleet Team Digest article 747-FTD-56-05001. Describes failure of 747 #3 window due to vinly cracks in the inner fail-safe interlayer.
An example of a #1 window (Sierracin)is sandwiched from outside to inside = .05" chemcor glass; .10" PVB; .9" stretched acrylic; .05" PVB; .9" stretched acrylic; .075" PVB; .05" chemcor glass crewshield all sealed and sandwiched in the frame assembly. After 1974 the chemcor glass will be .085".
An example of a #1 window (Sierracin)is sandwiched from outside to inside = .05" chemcor glass; .10" PVB; .9" stretched acrylic; .05" PVB; .9" stretched acrylic; .075" PVB; .05" chemcor glass crewshield all sealed and sandwiched in the frame assembly. After 1974 the chemcor glass will be .085".
- Status
Similar threads
- Locked
- Question
- Question
- Question