Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Material -B169-CDA.614 IN 1/2"

Status
Not open for further replies.
moshe1

moshe1

Industrial
Joined
Jul 23, 2013
Messages
1
Location
PE
COULD PLEASE HELP ME I NEED TO KNOW IF MATERIAL B-169-CDA.614 IN 1/2 "THICK aaun THERE ON THE MARKET AND THERE IS MATERIAL IF YOU CAN REPLACE??
 
Status
Not open for further replies.

Similar threads

G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Christian Dimitrov
  • Locked
  • Question Question
Forged flanges in A182 F347
Replies
7
Views
1K
EdStainless
EdStainless
Muza33
  • Locked
  • Question Question
SA 537 CL 2 Welding electrode
Replies
3
Views
1K
DVWE
DVWE
Andrewstructure
  • Locked
  • Question Question
Cast Steel - Johnstown Works Grade SX, .10-.20 C
Replies
0
Views
721
Andrewstructure
Andrewstructure
TenPenny
  • Locked
  • Question Question
Codes cannot be copyrighted if they are incorporated into law
Replies
2
Views
843
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top