Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
MATCH PROPERTIES 2
- Thread starter johnhan76
- Start date
-
2
- #2
CADSTUDENT
Mechanical
Match properties (the paint brush) is still present on the standard toolbar with paste, cut, ect. Is your toolbar that for these icons present? If not, then right-click an empty space in the tool bar and select this toolbar to bring into the drawing. Match properties can also be selected from the modify pull-down, or enter MA, MATCHPROP, or PAINTER at the command prompt. You didn't indicate if you ran any Autolisp programs that may effected your setting and preferances. Let me know if this helps. John
- Status
Similar threads
- AmarilloBur3
- Autodesk: AutoCAD