Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mass Participation Ratio in SAFE

Status
Not open for further replies.
LukeLdh

LukeLdh

Civil/Environmental
Joined
Jan 2, 2017
Messages
1
Location
SG
Dear All

When we perform a modal analysis in SAFE, is there a way for us to read the Mass Participation Ratio for each of the modes after analysis is performed? When I tried to display result with Show Tables, it seems that only the Mode Frequencies and Period can be displayed.

Any help is greatly appreciated.

Untitled_ohpphi.png

Untitled_za5kr2.png
 
Status
Not open for further replies.

Similar threads

EngDM
  • Locked
  • Question Question
Slab on Grade in Safe
Replies
0
Views
1K
EngDM
EngDM
moyseh
  • Locked
  • Question Question
SAFE 21 Issues
Replies
0
Views
1K
moyseh
moyseh
Ali Shariff
  • Locked
  • Question Question
Urgent !!!!!! Safe Analysis show Large Enormous displacement values in Ux and Uy direction
Replies
2
Views
1K
Celt83
Celt83
Luceid
  • Locked
  • Question Question
SAFE slow analysis
Replies
1
Views
1K
Luceid
Luceid
Hazelhorn
  • Locked
  • Question Question
Understanding CSI SAFE punching shear perimeter (CSA A23.3-14)
Replies
0
Views
1K
Hazelhorn
Hazelhorn

Part and Inventory Search

Sponsor

Back
Top