Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Manufacturing techniques

Status
Not open for further replies.

pmetelos

Mechanical
Joined
Dec 20, 2000
Messages
9
Location
PT
Hello,
I am searching for manufacturing techniques for composite materials with epoxy/glass fiber. Namely, techniques that have low cost of production but allow a good surface precision and finishing, since I want to produce very small quantities with low initial investment.
Where do you think I can find such information?
Thanks,
P. Metelos
 
We have devised a new low-pressure, low-temperature (LP/LT) process that produces a finished material w/ excellent product characteristics free of the stresses inherent within other processes. The LP/LT also means less moneys invested in high pressure delivery systems, expensive molds, or energy to heat materials. These efficiencies are achieved without compromise to product integrity or performance.

If you're interested, send me your Email address and I'll forward some materials for your evaluation.

Joe Miller
NuPro Innovations, Inc.
nuprosale@msn.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top