Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Manufacturing steps of a simple key

Status
Not open for further replies.
Mechcag

Mechcag

Mechanical
Joined
Jan 11, 2004
Messages
1
Location
TR
I'm interested in the manufacturing steps of a simple key. Starting from the sheet metal to forging process and so on. Just the basic steps not the process parameters or anything.
 
Sort by date Sort by votes
Mechcag,
First question: To what level of completeness? Key blanks or finished to lock?
Second: By simple, I assume you mean metal only, no plastic grip?
Third: Side groves or simple flat?

"Simple" is a relatively relative term!

Griffy
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Locked
  • Question Question
WIRE LASER ADDITIVE MANUFACTURING
Replies
1
Views
2K
btrueblood
btrueblood
elinah34
  • Locked
  • Question Question
Design for manufacturing - Laser Cutting or Water Jet Cutting technologies
Replies
18
Views
10K
elinah34
elinah34
Joccob
  • Locked
  • Question Question
Simple Coefficient of Friction Calculation / Principle Behind Friction Test Machine
Replies
14
Views
1K
btrueblood
btrueblood
Daparojo252
  • Question Question
Deflection Of A Mass Due To Centrifugal Force
Replies
11
Views
5K
Daparojo252
Daparojo252
Poorpaulus
  • Question Question
Tightest realistic tolerance of a 200mm ID cylinder
Replies
11
Views
4K
GregLocock
GregLocock

Part and Inventory Search

Sponsor

Back
Top