Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Manufacturing Differences between NC and ND piping

Status
Not open for further replies.
ArunavaSinha

ArunavaSinha

Chemical
Jan 1, 2016
8
Is there any manufacturing differences between ASME Section III NC piping and ND piping. Can we use Class 3 piping (ND) as a replacement of Class 2 piping (NC) after carrying out required NDT tests for NC piping?
 
Status
Not open for further replies.

Similar threads

MicroEng
  • Locked
  • Question
RTJ Gasket manufacturing row material!
Replies
0
Views
1K
MicroEng
MicroEng
YuJie_PV
  • Locked
  • Question
Is there a paradox between UCS-68(b) and UCS-68(c)?
Replies
2
Views
579
YuJie_PV
YuJie_PV
Krishna_Manyam
  • Locked
  • Question
DIFFRENCE BETWEEN P355QH1 AND P355NH
Replies
3
Views
577
riteshk14
riteshk14
victor6397
  • Question
Plastic Collapse and ratcheting assessment locations
Replies
1
Views
2K
TGS4
TGS4
hugo50ml
  • Question
Concerns Regarding ASME Certification and Company Conduct
Replies
0
Views
2K
hugo50ml
hugo50ml

Part and Inventory Search

Sponsor

Back
Top Bottom