Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Manufacturer's Data Report certification

Status
Not open for further replies.
elzein9

elzein9

Mechanical
May 2, 2013
1
I am looking for a company/PE to certify and provide an MDR based on ASME section 8. would you recommend any in the houston area?


Thank you.
 
Status
Not open for further replies.

Similar threads

FPPE
  • Locked
  • Question
PV Elite Report - Tubes of the bundle
Replies
5
Views
3K
CuMo
CuMo
Pavan Kumar
  • Locked
  • Question
Deaerator Design and Operation Report Making Help
Replies
1
Views
2K
FacEngrPE
FacEngrPE
FPPE
  • Locked
  • Question
Platforms and ladders certification for pressure vessel column under PED 1
Replies
2
Views
261
GoguGigi
GoguGigi
pvros
  • Locked
  • Question
PTB-3 - E5.2.3 - Stress strain curve data
Replies
3
Views
374
DriveMeNuts
DriveMeNuts
MJCronin
  • Locked
  • Question
CSB Final Report - YENKIN LP Pressure Vessel explosion - ONE DEAD, Massive Damage 3
Replies
3
Views
249
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top Bottom