ruengineer
Mechanical
Hi I am looking for some help in Pro E 4.0. I am looking to make a cut through an assembly in order to view the inside "guts"/parts and to make sure all my parts are aligned correctly. Is there an easy way to do this???
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Making a cut in an assembly
- Thread starter ruengineer
- Start date
- Status
Do you just want to visualize it? Go to View/Display Settings/Visibilities and change the clipping depth. You can also hide outside parts or put them in wireframe.
For both model and drawing use you can make a cross section. View/view manager/xsec.
You can also make an assembly cut but this adds unnecessary overhead and features and is kind of a last resort.
----------------------------------------
The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
For both model and drawing use you can make a cross section. View/view manager/xsec.
You can also make an assembly cut but this adds unnecessary overhead and features and is kind of a last resort.
----------------------------------------
The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question