Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Making a camera pressure tolerant

Status
Not open for further replies.
windell747

windell747

Mechanical
Joined
Jun 16, 2005
Messages
64
Location
US
Aloha, I'm searching for a liquid or oil that has an index of refraction close to the index of refraction of air. I'm not sure if this is possible. I know that highly pressure tolerant cameras exist today for underwater applications, but they are rather costly. I would like to keep costs down by pressure tolerating a digital camera that I already and using this liquid for an ROV.

Suggestions are welcomed!

Mahalo!
windell747
 
Status
Not open for further replies.

Similar threads

mrmalcolm
  • Locked
  • Question Question
Qualification of surface tolerant coatings
Replies
2
Views
1K
mrmalcolm
mrmalcolm
JoeBobJenkins
  • Question Question
Looking for a replacement for bronze sil-brazed unions
Replies
5
Views
13K
JoeBobJenkins
JoeBobJenkins
Nut Blaster
  • Locked
  • Question Question
Grounding of EGCs locally on a 480V HRG system
Replies
1
Views
1K
TugboatEng
TugboatEng
iCER95
  • Locked
  • Question Question
Hello I am a bit confused with this
Replies
1
Views
1K
IRstuff
IRstuff
brokensword
  • Locked
  • Question Question
pond diy PoE camera housing issues
Replies
8
Views
799
brokensword
brokensword

Part and Inventory Search

Sponsor

Back
Top