Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Magnetic permeability of Cronite HR6 or RA-330 stainless?

Status
Not open for further replies.
carbide

carbide

New member
Jan 29, 2001
2
Does any one know the magnetic permeability of Cronite HR6 high temp stainless (made up of 0.4-C; 25-Cr; 20-Ni; 1-Mn; 1.1-Si) or any other material resembling the above. I know RA-330 is very similar...

Thanks in advance,
Alek Derejian
 
Status
Not open for further replies.

Similar threads

kelcgza
  • Locked
  • Question
304 stainless pitting issue - looking for source of chlorides
Replies
11
Views
880
EdStainless
EdStainless
Scott Price
  • Locked
  • Question
Magnetic Materials for moderately high temperature use 2
Replies
3
Views
555
Scott Price
Scott Price
G
  • Locked
  • Question
Stainless Steel for ASME BPVC VIII
Replies
3
Views
4K
Andy Mayfield
A
Saad M.M.
  • Locked
  • Question
Is ASTM A262, Practice E sufficient to ensure solution annealing of 316L stainless steel?
Replies
5
Views
3K
SK METT
SK METT
F
  • Question
Guidance on Zirconium Overlay (ERZr-2) on 316L Stainless Steel Using GTAW
Replies
3
Views
3K
weldstan
weldstan

Part and Inventory Search

Sponsor

Back
Top Bottom