Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Maglev Fans 2
- Thread starter Tunalover
- Start date
-
1
- #2
EdStainless
Materials
Yes, but I haven't been running them long.
They are quiet, and they (70mm) move more air than a similar noise level 80mm conventional fan.
In my assorted computers I have about 15 fans, mostly 60mm and 80mm. These all run 24/7. I only have a couple of the mag fans. I rarely see fan failures, so it may be a while before I have an opinion on them.
= = = = = = = = = = = = = = = = = = = =
Corrosion never sleeps, but it can be managed.
They are quiet, and they (70mm) move more air than a similar noise level 80mm conventional fan.
In my assorted computers I have about 15 fans, mostly 60mm and 80mm. These all run 24/7. I only have a couple of the mag fans. I rarely see fan failures, so it may be a while before I have an opinion on them.
= = = = = = = = = = = = = = = = = = = =
Corrosion never sleeps, but it can be managed.
- Thread starter
- #3
-
1
- #4
There may be other sources, but here's one:
ko (
ko (
EdStainless
Materials
The one true mag bearing fan that I run is a Sunon.
I also run a couple of the YSTech TMD fans. These are real cool and quiet. The aren't strictly mag bearing fans, but hte tip drive is nice.
look under new products for TMD.
= = = = = = = = = = = = = = = = = = = =
Corrosion never sleeps, but it can be managed.
I also run a couple of the YSTech TMD fans. These are real cool and quiet. The aren't strictly mag bearing fans, but hte tip drive is nice.
look under new products for TMD.
= = = = = = = = = = = = = = = = = = = =
Corrosion never sleeps, but it can be managed.
- Status
Similar threads
- Locked
- Question
- Locked
- Question