Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

machining nitralloy type 135

Status
Not open for further replies.
kellybilly

kellybilly

Industrial
Joined
Sep 6, 2001
Messages
1
Location
US
i have been trying to find an insert that will hold up while turning nitralloy 135. an insert grade for roughing and finish turning along with spindle speeds and feeds would be helpful. any info would be appreciated
 
Sort by date Sort by votes
Everybody knows the Kennametal C6 grades are superior for this material
 
Upvote 0 Downvote
Almost everybody knows that Sandviks MT-CVD grades kick the K out of ennametal. Check out the 4025 for roughing and the 4015 for finishing.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

gonzowerke
  • Locked
  • Question Question
Best Method of machining a Brake rotor to a smaller diameter?
Replies
2
Views
516
ornerynorsk
ornerynorsk
zipthetrip
  • Locked
  • Question Question
Plate type heat exchangers
Replies
1
Views
179
HEC
HEC
nonsinusoidal
  • Locked
  • Question Question
Type of Frame Steel Support in Vaults
Replies
0
Views
129
nonsinusoidal
nonsinusoidal
banjoray
  • Locked
  • Question Question
What type gear is right for punching square holes in aluminum angle?
Replies
0
Views
170
banjoray
banjoray
zipthetrip
  • Locked
  • Question Question
What type of pipe?
Replies
1
Views
172
Ashereng
Ashereng

Part and Inventory Search

Sponsor

Back
Top