Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
M5 Screw Preload
- Thread starter Lee.Conti
- Start date
As long as the hole in the "first" part is a clearance hole, and the hole in the "second" part is tapped to receive the screw, yes.
Example A here -
Example A here -
- Status
Similar threads
- Locked
- Question