We have a lube oil unit for a fan. We have a temperature switch in the tank to inhibit the start when the temp is below 20'c, so this is one switch point correct? We also have another temperature switch that controls the heaters in the tank by turning them on when the temp is below 20 'c and turns them off when another temp is reached. Would this be a switch with two switch points or one switch with adequate hysteresis.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Lube oil unit question
- Thread starter Lc85
- Start date
Similar threads
- Locked
- Question