Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ltscale

Status
Not open for further replies.
Welshman

Welshman

Computer
Joined
Dec 16, 2002
Messages
28
Location
GB
Is is possible to have one drawing that has two xrefs in model spaces and display them in paper space in two seperate vports with each vport having a different LTSCALE.

For instance Vport one is showing a 1:500 OS map with a LTSCALE of 500 and vport two is showing a 1:20 detail with an LTSCALE of 20.

This is so that hidden and dashed lines appear as required in both vports.

Regards

Welshman
 
Sort by date Sort by votes
Yes this is controlled with the psltscale command set this to 1 and changing the ltscale to 1. Your viewports ltscales will then be set to the scale of the viewport.
 
Upvote 0 Downvote
Thanks Friptzap

Its seems to work a treat.

regards

Welshman
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

cfee
  • Locked
  • Question Question
More on LTSCALE & PSLTSCALE
Replies
2
Views
169
cfee
cfee
TeriF
  • Locked
  • Question Question
LTSCALE problem
Replies
2
Views
271
TeriF
TeriF

Part and Inventory Search

Sponsor

Back
Top