hi.is it ok to run a new engine in on propane/LPG.has anyone heard of a wax filter that bleeds into the gas line to assist lubrication of bore and valves while running in a new engine. The engine is straight gas.someone told me u can only use petrol to bed the rings in.thanks?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
lpg/propane engine bedding
- Thread starter mathewvos
- Start date
mathewvos:
If the engine is set up for gasoline, you will need to modify it to run on LPG/Nat Gas such as different carburator, etc. I have broken engines in using the fuel on which they are built to run (gasoline/diesel). the big thing is to follow the recommended break in procedure. Do that and it will be fine.
Regards
Dave
If the engine is set up for gasoline, you will need to modify it to run on LPG/Nat Gas such as different carburator, etc. I have broken engines in using the fuel on which they are built to run (gasoline/diesel). the big thing is to follow the recommended break in procedure. Do that and it will be fine.
Regards
Dave
- Status
Similar threads
