Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

LP-ICDA POSSIBLE WITH BS&W >35%? 1

Status
Not open for further replies.
InCorr

InCorr

Chemical
Joined
Jun 27, 2011
Messages
1
Location
NG
have a pipeline that is unpiggable and we plan to perform LP ICDA to check the itnernal condition of the pipe. however the BS&W is about 35% and NACE specifies 5% as the max allowable BS&W to enable use of LP-ICDA but also mentions sound engieering could be applied to tweek this process to still obtain useful info. Any help on which methods that could be applied as flow modelling may not be adequate
 
Status
Not open for further replies.

Similar threads

Tom_D1
  • Locked
  • Question Question
h2o2 35% on Alu 5083 at 150°
Replies
2
Views
403
dik
dik
GlobeKS
  • Locked
  • Question Question
Galvanic Corrosion between 304SS & A36
Replies
1
Views
560
EdStainless
EdStainless
alhameli
  • Locked
  • Question Question
Offshore Piping Refurbishment Approach - High Corrosion on Piping & Valves
Replies
3
Views
640
alhameli
alhameli
Zahib
  • Locked
  • Question Question
SS cladding with Galvanic corrosion issues
Replies
2
Views
896
EdStainless
EdStainless
mrmalcolm
  • Locked
  • Question Question
Which materials are compatible with methanol
Replies
7
Views
3K
MortenA
MortenA

Part and Inventory Search

Sponsor

Back
Top