KirbyWan
Aerospace
- Apr 18, 2008
- 586
Howdy all,
We have a UTS tensile testing machine that we use for tensile testing, lap shear testing, flatwise tensile testing, and several peel tests, but we wanted to add some compression testing capabilities. We put together a test stand following an example in ASTM D695, and I plan on creating a template in Datum 4.0 to do the testing, but I wondered if anyone who performs this test using this software would be willing to share their template.
Thanks,
-Kirby
Kirby Wilkerson
Remember, first define the problem, then solve it.
We have a UTS tensile testing machine that we use for tensile testing, lap shear testing, flatwise tensile testing, and several peel tests, but we wanted to add some compression testing capabilities. We put together a test stand following an example in ASTM D695, and I plan on creating a template in Datum 4.0 to do the testing, but I wondered if anyone who performs this test using this software would be willing to share their template.
Thanks,
-Kirby
Kirby Wilkerson
Remember, first define the problem, then solve it.
