Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Looking for some TCC/spec sheets for old company fuses: CEFCO

Status
Not open for further replies.

tricard

Electrical
Jul 9, 2008
38
Hello everyone,

I was wondering if anybody knows where I can find some old fuse TCCs for the now-nonexistent company CEFCO (Commercial Enclosed Fuse Company of New Jersey). I have some characteristic curves in EasyPower but I would like to find some old documentation on these fuses. The particular fuse is a CEFCO Cefcon type CRS fuse. I tried all my typical routes to no avail. I was hoping that maybe one of the fuse giants bought this company out, in which case I could contact them, but I have seen no indication of this.
 
Replies continue below

Recommended for you

Didn't Littlefuse get in to the "big fuse" business by buying Cefco?

"Dear future generations: Please accept our apologies. We were rolling drunk on petroleum."
— Kilgore Trout (via Kurt Vonnegut)

For the best use of Eng-Tips, please click here -> faq731-376
 
If ESA has the curve in EasyPower, I suspect they will have some supporting documentation. I would check with their tech support.
 
Thanks for the help, guys. Funny enough, I never even thought to just contact ESA for their documentation. Looks like Littelfuse on first glance, has very little information on that acquisition, but I will give them a call as well.

Take care.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor