Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Looking for finger print scanner to interface with PLC

Status
Not open for further replies.

Bullfrog1870

Electrical
Jul 23, 2006
2
I'm looking for a finger print scanner to interface with an AB Contrologics processor. We don't have a computer on machine so I'm limited with interface options. It will be so operators can uniquely "log-in" to the machine and enable certain features based on their rights.
 
Replies continue below

Recommended for you

I've never forayed into this field, but it piqued my interest, and took a look around. I have been idly thinking about doing something similar, but using a magnetic swipe card reader, and our existing time & attendance cards.

Synel and Suprema make fingerprint readers which might be coaxed into working. I didn't looked nearly closely enough, but with at least one of them you may be able to get at them over an Ethernet comm line.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor