Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

looking back some past thread (252497) create point on surface/solid

Status
Not open for further replies.
itsmyjob

itsmyjob

Mechanical
Apr 11, 2002
2,375
thread560-252497

Saving file as STL could also create points on solid.


Eric N.
indocti discant et ament meminisse periti ​
 
Status
Not open for further replies.

Similar threads

U
  • Locked
  • Question
Point on curve on min curvature radius
Replies
4
Views
2K
ulitsakalarash
U
rookiezzz
  • Locked
  • Question
Return the nearnest surface and edge from body against point 1
Replies
2
Views
2K
rookiezzz
rookiezzz
DaveJFT
  • Question
Component/surface highlighting
Replies
3
Views
4K
brucesilver
brucesilver
DiaeArrahmane
  • Locked
  • Question
CATIA MACRO: create a new point from a reference point
Replies
2
Views
459
DiaeArrahmane
DiaeArrahmane
NaWin55
  • Locked
  • Question
Catia EKL Create Point
Replies
6
Views
510
itsmyjob
itsmyjob

Part and Inventory Search

Sponsor

Back
Top Bottom