Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lofted Flange bend angle

Status
Not open for further replies.
onefjef

onefjef

Agricultural
Joined
Jul 14, 2006
Messages
119
Location
US
I have a sheet metal cover panel that is constructed as a lofted flange. It has several square to round transitions. I flatten the part with the triangulation option turned on to create the bend centerlines. In draft I would like to know what the bend angle is on the center lines that it creates. I have tried using the property text both %BN and %BA but it generates a 0 degree angle for every bend. Does SE export bend angle data for flattened lofted flanges? If so how can I access?

Jef
V19
Sheet metal part
 
Status
Not open for further replies.

Similar threads

Pulsar123
  • Locked
  • Question Question
Protrusions on curved/lofted surfaces?
Replies
0
Views
833
Pulsar123
Pulsar123
MaxG82
  • Locked
  • Question Question
Sheet metal cone with flange on SolidEdge
Replies
1
Views
322
bshand
bshand
Fonzee
  • Locked
  • Question Question
Modify Bend Angle, then flatten
Replies
1
Views
177
teebarr
teebarr
plcorriveau
  • Locked
  • Question Question
Bend lines - Up or Down
Replies
3
Views
472
beachcomber
beachcomber
andyke001
  • Locked
  • Question Question
bending parts in solid edge
Replies
11
Views
509
andyke001
andyke001

Part and Inventory Search

Sponsor

Back
Top