Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Lockwire nuts
- Thread starter 22west
- Start date
Building race cars I usually try to safety wire as much as is practical. Not a big deal so I use a jug and drill press most often. However when I need more than just a few for some project I get my NAS stuff at Deering Industries in Long Beach, California , right next to Boeing Bldg. 55. For predrilled G-8 nuts and/or capscrews I hit the surplus joints and buy up all I can carry. Beyond that I am no help, sorry.
Rod
Rod
Aircraft Spruce is a good source of hardware. Check them out at I believe they also sell a fixture that will let you drill your own holes in a nut or bolt head.
You also might want to try Wicks Aircraft, just outside of St.Louis. They have everything for homebuilt aircraft:
- Status
Similar threads
- Locked
- Question
