Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Locking mesh

Status
Not open for further replies.
Jam3s

Jam3s

Bioengineer
Joined
Aug 20, 2009
Messages
13
Location
IT
Hi everybody.
I've a question. I know that there are several way to lock the mesh, i.e. shear locking or volumetric locking. But I would like what locking means exactly, if somebody could explain to me.
Thanks in advice,

Jam3s
 
Status
Not open for further replies.

Similar threads

swahlgren
  • Question Question
Splitting part while keeping mesh
Replies
2
Views
14K
swahlgren
swahlgren
IcarusAero223
  • Question Question
Mesh singularity on non-manifold geometry
Replies
5
Views
10K
IcarusAero223
IcarusAero223
E
  • Locked
  • Question Question
Mesh Problem
Replies
1
Views
2K
FEA way
FEA way
AlanSYH_
  • Locked
  • Question Question
Mesh Convergence Test
Replies
6
Views
1K
AlanSYH_
AlanSYH_
K
  • Question Question
Trouble Meshing Imported SolidWorks Part in Abaqus – Need Help with Hex or Hex-Dominated Mesh
Replies
2
Views
12K
Simfinite engineering
Simfinite engineering

Part and Inventory Search

Sponsor

Back
Top