Francisco Zabaleta
Chemical
God day, for everyone.
I am design a system for leak control in LNG storage facilities no refrigerated, with water injection.
Many norms as ASTM2510, ASTM2510a and NFPA 59a, show some general guidelines for this system but no give Design Variables like:
Filling Time (Variable requests for the Pumping Calculations).
Anyone have some reference, norms (Russian, Chinese, USA, Europa), god practice or existing /constructed Facility; that have hard
design parameters.
Regards
I am design a system for leak control in LNG storage facilities no refrigerated, with water injection.
Many norms as ASTM2510, ASTM2510a and NFPA 59a, show some general guidelines for this system but no give Design Variables like:
Filling Time (Variable requests for the Pumping Calculations).
Anyone have some reference, norms (Russian, Chinese, USA, Europa), god practice or existing /constructed Facility; that have hard
design parameters.
Regards
