qaengineer1969
Mechanical
Can anybody help me I need to set up a linear repair register and I don't know where to start . please help
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Linear Repair register
- Thread starter qaengineer1969
- Start date
- Status
LittleInch
Petroleum
Try using Excel. For each pipeline or pipe line number, have a sheet or tab with:
First column is Kp or distance point, next column type of repair (clamp, sleeve, fibre wrap etc), next one permanent or temporary repair, next one date of repair, next one indicating if it needs to be removed at the next shutdown, next one comments, etc
My motto: Learn something new every day
Also: There's usually a good reason why everyone does it that way
First column is Kp or distance point, next column type of repair (clamp, sleeve, fibre wrap etc), next one permanent or temporary repair, next one date of repair, next one indicating if it needs to be removed at the next shutdown, next one comments, etc
My motto: Learn something new every day
Also: There's usually a good reason why everyone does it that way
- Status
Similar threads
- Locked
- Question