Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Linear Bearing Design

Status
Not open for further replies.
numatic

numatic

Mechanical
Joined
Sep 20, 2005
Messages
1
Location
SD
Does anyone know anything about linear bearing design? We have an application which involves a stainless steel spool that cycles through currently a CA360 Brass bushing. I would like to change to possibly a graphite impregnated bronze bushing or something similar. If anyone has any experience or can help me out I'd really appreciate it. I have assembly drawings in .PDF format as well.

Thanks a million!
 
Status
Not open for further replies.

Similar threads

8
  • Locked
  • Question Question
Are Linear guideways overkill in this design?
Replies
6
Views
3K
Orange_kun
Orange_kun
elinah34
  • Locked
  • Question Question
Locking the position while using a linear slide
Replies
2
Views
1K
elinah34
elinah34
Helepolis
  • Locked
  • Question Question
Suggestion: Laser Welding System for Thin Stainless Steel & Non-Linear Weld Paths?
Replies
2
Views
2K
tygerdawg
tygerdawg
Keratin
  • Locked
  • Question Question
Bearing Placement Advice
2
Replies
22
Views
1K
Keratin
Keratin
Shafty1
  • Question Question
pipe clamp design
Replies
7
Views
6K
Stress_Eng
Stress_Eng

Part and Inventory Search

Sponsor

Back
Top