Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

lifting padeye design codes... 1

Status
Not open for further replies.

chinus

Mechanical
Joined
Apr 25, 2003
Messages
5
Location
US
Building some nitrogen storage tanks for off-shore work. Need to design lifting padeyes for them. Anyone know of any design codes on this subject? Thanks in advance for your help,

regards,
 
In the US the following may help guide guide you:
ASME B30.20a-2001 Structual and Mechanical Lifting devices. Section 20-1.2.2 Construction
CMAA crane requirements
AASHO 1.6.17
Steel Construction Manual-AISC
Occupational Safety and Health Administration (OSHA) 29 CFR standard 1926.753(e)(2) and 1926.251
American Society of Testing and Materials Specifications A391
Naval Facility Command NAVFAC-307
American National Standards Institute, "Below The Hook Lifting Devices"
 
Thanks boo1,

regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top